What size staples for 3 8 engineered flooring

1 1/2 inch3/8 and 1/2 thick products can use : 1 1/4 or 1 1/2 inch 18 gauge staple.

Can you staple 3/8 engineered flooring?

For Engineered Flooring and Thinner Solid Wood Flooring Use 1″ to 1-1/4″ long staples for thinner 1/4″ to 5/16″ thick floors. Use 1-1/4″ to 1-1/2″ long staples for 3/8″ to 1/2″ thick floors. Use 1-1/2″ long staples for 5/8″ thick floors.

How do you install 3/8 inch hardwood flooring?

Tools: Staple down using 1 1/4 to 1 1/2 inch long staples depending on the flooring product. (5/8 inch thick flooring can use 1 1/4 or 1 1/2 long staple , 9/16 thick flooring should use 1 1/2).

What size staples do you use for hardwood flooring?

Staple each board along the tongue every 4 to 6 inches apart and within 2 inches of each end joint. This should be done to the entire floor.

How do you staple engineered hardwood floors?

Staple-down installation is used for prefinished, engineered hardwood flooring on wood subfloors. This method uses a narrow crown stapler?which has a special nose that guides the staple through the tongue at the perfect angle?to fasten the flooring to wood subfloors.

How far apart should engineered hardwood be stapled?

If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry. If you are installing hardwood flooring then using glue may give you a more stable result.

Can I use a crown stapler for engineered hardwood?

Glued down engineered wood flooring is the most popular method of installation, and we always recommend this options because it’s the more stable option out of the two.

Should you glue down engineered flooring?

How long should nails be for 3/4 hardwood flooring? The general rule of thumb is 1-3/4 inch nails for 3/4-inch flooring. However, there are exceptions. If your subfloor is wood over floor joists or two layers of 1/2-inch plywood over concrete, then you need to use a 2-inch nail.

What size nails should be used for 3/4 inch hardwood flooring?

Because they allow the flooring to move the way the wood wants to move, cleats result in less creaking and squeaking. They work well with hard and exotic woods. Staples, on the other hand, secure flooring very tightly. Thinner, softer, or engineered woods handle staples well.

Can I use a crown stapler for engineered hardwood?

A brad nailer is one way to install engineered hardwood. Engineered hardwood is a solid wood floor product that is manufactured from thin layers of hardwood laminated together to provide planks with good durability and incredible dimensional consistency.

Is it better to use cleats or staples for hardwood flooring?

While the choice does depend on several factors, on-the-whole, staples are more convenient, but nails, specifically cleat nails, are long-lasting. Cleat nails are the ideal choice for hardwood flooring.

What is the best fastener for hardwood flooring?

A staple will give a stronger, less-forgiving hold because of its two-pronged construction. Nails allow for a more natural expansion and contraction of the hardwood floorboards with fewer problems.

---

Videos

---